You have no items in your shopping cart
The D-Raintank 3000 is also a system for the ecologically useful use of rainwater, which can store rainwater after the professional installation and can successively deliver three-dimensionally to the ground around it. The low-maintenance system is suitable for roof, farm, storage and road drainage, for the drainage of industrial sites and for combination with a channel or a filter shaft. In addition, it can be used for the overflow of a system for collecting rainwater.
Optimum power transfer
Colour: Grey. Suitable for 3-layer installation. The high load-bearing capacity is ensured by the statically optimized construction and the use of the wear-resistant plastic PVC-U with an e-module of more than 3000N / mm. They are composed of two half shells, which consist of a grid plate with four supporting pillars each. The construction (<10 kg / element) ensures optimum power transfer to the subsurface. The position of the individual elements, which can be flowed three-dimensionally and can be installed in three layers above each other, is secured via blue 4-way connectors. Storage capacity 97% The storage capacity is 97%, while a conventional gravel or rubble slot only reaches about 30% to 35%. The simple processing of the ready-to-use elements on the building site is a big advantage. They are easy to install and can be arranged in a space-saving manner. The outer sides of a tank are equipped with special gridded side plates. Inside the tank, on the other hand, no side plates are required. As a result, the camera has free passage and inspection in every direction over the entire length is possible. Tubes from DN160 to 400 can be connected to the side plates. The D-Rinse tank elements of the system can be fitted with flushing pipes with a diameter of DN200-400. Because the inspection blocks can be placed at any desired location, the tank can be inspected. CE-approved, DiBt-zulassung. Weight 10.5kg. Suitable for heavy traffic SLW60.
was added to your shopping cart
Out of stock