You have no items in your shopping cart
Stainless steel one-piece floor drain W400 with slot (perforated) grid. Stainless steel 304, class L, 15KN, bottom drain 200mm
Article code | 260W400200V14B |
Drain W400
1-piece floor drain
Material Stainless steel AISI 304 (1.4301) with a plate thickness of 1.5 mm. The round well housing has a diameter of 348mm. The drain is equipped with a vertical outlet 200mm and an inspectable stench trap with EPDM seal, in accordance with European standard EN 1253. The gully housing and stench trap (flow rate 13.9 l/s) are designed in such a way that no waste water remains in the well body, but only in the stench trap according to EHEDG. The height of the water seal is 50 mm according to EN1253. The top surface is square, 400 x 400 mm. The outer edges are folded in an inverted folded U-edge with solid stainless steel full material edge reinforcement against mechanical and thermal stress according to EHEDG. The drain has a dirt trap (capacity 5 l) with handle. After folding and welding, the whole is pickled by immersion and passivated. The circumferential top edge is ground with 240 grit. The drain is fitted with set screws and anchoring.
Let us help!