GRATIS EEN CADEAU BIJ BESTELLINGEN VANAF 100 EURO. WEES ER SNEL BIJ.
Voor 14:00 besteld? Vandaag verzonden!
Ruim 25 jaar ervaring
Grootste assortiment van Nederland
Veilig betalen met SSL

Type I self-supporting drainage channels

Stradal self-supporting grate gutter Urban-I

Stradal self-supporting grate gutter Urban-I

Radiant self-supporting grate channel Prefaest HRI

Radiant self-supporting grate channel Prefaest HRI

Aco self-supporting lattice gutter ExoDrain

Aco self-supporting lattice gutter ExoDrain

Type I self-supporting drainage channels

Our program consists of 3 types of self-supporting drainage gutters.

URBAN I

A major step forward in today's street scene.

The self-supporting Urban-I grate gutters from Stradal are marketed in the Netherlands by Diederen Afwateringstechniek. A self-supporting grate, equipped with an aesthetically and innovatively designed grate, specially developed for a smooth integration into the design of our public space.

With the self-supporting I-type concept in accordance with EN 1433, the URBAN-I offers a technical and innovative solution to meet today's challenge in the field of sustainable protection against flooding.

The grid
The timetable of the URBAN-I adapts to your wishes. Available in all RAL colors, so the possibilities for personalization of the URBAN-I are great. Show your creativity and create a unique design in combination with this innovative solution. Let the URBAN-I be part of your design!

 

 

HRI

These line drainage gutters have been the most sustainable solution for drainage projects for years.

The self-supporting HRI grate gutters from Stradal are marketed in the Netherlands by Diederen Afwateringstechniek. A self-supporting line drainage, equipped with a cast iron "BANANE" or "SAÔNE" profile grille class D, 400KN or F, 900KN.

Stradal HRI® line drainage gutters are the most sustainable solution for drainage projects. The patented production method, in which use is made of a very high (self-compacting) concrete quality and in which the gutters are provided with a steel longitudinal and transverse reinforcement, to which also the galvanized corner profiles and screw sleeves are coupled, give the possibility that HRI® gutters are installed without a supporting back could be. Even with traffic class F, 900KN. In accordance with NEN-EN 1433, drainage gutters for traffic areas, the HRI® gutters fall under the so-called I-type.

In addition, HRI® gutters are fitted with pre-assembled, specially developed, nodular cast-iron gratings. The profile ensures optimum and rapid absorption of water. The HRI® gutters are also equipped with a barge / nut end. In combination with the pin / hole connection, this ensures optimum support between the channel elements. Thanks to the prepared sealant joint, it is possible to finish the elements in a liquid-tight manner. Sand trap elements and end plates can be supplied with a PVC or HDPE connection.

 

ExoDrain

The demands placed on drainage systems are becoming increasingly challenging. In addition to the basic function of good drainage, aspects such as appearance, ease of maintenance, available installation height and method of installation also play an increasingly important role. Standard gutter systems from concrete or polymer concrete have their strengths, but also have limitations due to the required standardization. The ExoDrain was developed with that in mind.

The ExoDrain consists of an external (EXO) "skeleton" made of CorTen steel (or stainless steel). This skeleton is filled with concrete, creating an extremely strong construction that offers many advantages.
The ExoDrain does not require any concrete foundation or further lateral supplementation with concrete on a sufficiently load-bearing surface. (Type I acc. To NEN-EN 1433). As a result, there is no ugly wide concrete strip on the road surface that is normally around 10 cm wide quickly. The gutter width and height can be adjusted to any situation (even slope and "counter shot" are possible). The choice of materials also makes it possible to fabricate long gutter lengths (up to 3 meters) and one-piece corner pieces. This ensures shorter installation times and a perfect end result!

Special grid covers
Cast iron gratings can only be made in lengths of half a meter. If the grid cover is made in CorTen or stainless steel, lengths of up to 3 meters can also be produced. Because everything can be made to measure, the gratings can be produced entirely according to the customer's wishes. Of course, traffic tax must be taken into account!

 

Read more
Read less
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »

Voor 14:00 besteld?

Vandaag verzonden

Grootste assortiment

10.000 producten

Offerte aanvragen

Binnen 48 uur antwoord

Gratis advies

Bel ons

 

 

was added to your shopping cart

Out of stock

The requested quantity for is not available