Self-supporting sand trap Type I in accordance with EN1433. High-quality self-compacting concrete C55 / 67 with a reinforcement mesh. 100% recyclable cast iron and concrete. Resistant to frost, through, salts, ole and petrol, etc. Due to its design, the sand trap has a built-in resistance of strength class F, 900 kN. The proposed resistance is guaranteed by the whole. The sand trap has a tongue and groove connection and a recess for a safety joint (SF). With a liquid-tight version, this recess must be sealed. Galvanized steel posts provide an improved connection and straight-line placement. The top of the sand trap is provided with an integrated edge protection in galvanized steel, anchored in the concrete. The sand trap complies with the European Standard EN1433. Dimensions: length 75 cm; width 26.4 cm; height 60 cm. A cast-in socket is provided on 1 side for connection to the sewerage system with Ø 125 mm. On the other side there are two knock-out provisions of Ø 110 mm. Weight 180kg.
Pre-assembled BANANE ductile iron grille FGS 500-7, length 75 cm. The grid is delivered bolted to the sand trap: 4x bolted with stainless steel bolts, the stainless steel bolts are anchored in sleeves that are connected to the reinforcement. The slots in the grid are banana-shaped and have a width of 30 mm. The grille is fitted with diamond-shaped profiles to increase the water collection capacity and prevent slippage. The grille complies with load class F, 900 kN according to the European Standard EN 1433. Absorption surface = 810 cm2 / m.
The self-supporting sand traps allow installation without a lateral concrete casing (only a foundation is necessary). Installation instructions available on request.
Sand trap HRI 200 with cast iron BANANE grate class F, 900KN. Call the drainage specialist for FREE ..
By creating an account with our store, you will be able to move through the checkout process faster, store multiple addresses, view and track your orders in your account, and more.Register